Rated Voltage: 10 kV

Conductor Material: Aluminum conductor (stranded) with steel core

Conductor Cross-Section: Aluminum 185 mm² / Steel core 25 mm²

Insulation Material: Silane cross-linked polyethylene (XLPE)

Insulation Thickness: 3.4 mm

Temperature Resistance Range: Conductor temperature ≤ 90℃for long-term operation; ≤ 250℃ for short circuits (≤ 5 seconds); adaptable to outdoor environments of -40℃ ~ 40℃

Laying Requirements: Complies with 10 kV aerial cable specifications. Avoid high-temperature and corrosive areas. Minimum bending radius ≥ 20 × cable outer diameter. Use dedicated insulated clamps for outdoor fixation; leverage the steel core's properties to ensure erection stability.

Rated Voltage: 10 kV

Conductor Material: Aluminum conductor (stranded)

Conductor Cross-Section: 1 core × 50 mm²

Insulation Material: Silane cross-linked polyethylene (XLPE)

Insulation Thickness: 3.4 mm

Temperature Resistance Range: Normal operating temperature -40℃to 90℃; withstands 250℃ for short circuits (maximum duration 5 seconds)

Laying Requirements: The bending radius of the cable shall not be less than 12 times the cable outer diameter.

Rated Voltage: 10 kV

Conductor Material: Aluminum conductor (stranded)

Conductor Cross-Section: 1 core × 300 mm²

Insulation Material: Silane cross-linked polyethylene (XLPE)

Insulation Thickness: 3.4 mm

Temperature Resistance Range: Long-term operation ≤ 90℃; short circuit (≤5 seconds) ≤ 250℃; outdoor adaptation range -40℃ ~ 40℃

Laying Requirements: Complies with 10 kV aerial cable standards. Avoid high-temperature and corrosive environments. Minimum bending radius ≥ 20 × cable outer diameter. Use dedicated insulated clamps.

Rated Voltage: 10 kV

Conductor Material: Aluminum conductor (stranded)

Conductor Cross-Section: 1 core × 240 mm²

Insulation Material: Silane cross-linked polyethylene (XLPE)

Insulation Thickness: 3.4 mm

Temperature Resistance Range: Conductor temperature ≤ 90℃for long-term operation; ≤ 250℃ for short circuits (≤ 5 seconds); outdoor ambient temperature adaptation range: -40℃ ~ 40℃

Laying Requirements: Complies with 10 kV aerial cable specifications. Avoid high-temperature and corrosive environments. Minimum bending radius ≥ 20 × cable outer diameter. Use dedicated insulated clamps for outdoor fixation.

Rated Voltage: 1 kV

Conductor Material: Aluminum conductor (stranded)

Conductor Cross-Section: 1 core × 240 mm²

Insulation Material: Silane cross-linked polyethylene (XLPE)

Insulation Thickness: 2.2 mm

Temperature Resistance Range: Normal operating temperature: -40℃to 90℃; withstands 250℃ during short circuits (maximum duration: 5 seconds)

Laying Requirements: Suitable only for outdoor aerial installation. During erection, safety distances from the ground, buildings, and trees must be maintained (e.g., minimum distance of 6 meters from the ground in residential areas), and the parallel laying spacing between cables shall not be less than 0.1 meters.

Rated Voltage: 1 kV

Conductor Material: Aluminum conductor (stranded)

Conductor Cross-Section: 1 core × 400 mm²

Insulation Material: Silane cross-linked polyethylene (XLPE)

Insulation Thickness: 2.2 mm

Temperature Resistance Range: Conductor temperature ≤ 90℃for long-term operation; ≤ 250℃ for short circuits (≤ 5 seconds); adaptable to outdoor environments of -40℃ ~ 40℃

Laying Requirements: Must comply with outdoor aerial cable installation specifications